SMART Board 600i3, Configuration And User'S Manual

Page: 67 / 80

99-00915-20 B0 Appendix B: Remotely Managing Your SMART Board 600i3 Interactive Whiteboard System 57
Source Selection
Allows you to switch between input sources.
.
Command Response Powered Off
set input [target]
input=[current] no
get input [current]
input=[current] yes
Field Possible Values Description
target input =VGA1
=VGA2
=Composite
=S-Video
Allows you to select which application
you would like to switch to.
current input VGA1
VGA2
Composite
S-Video
None
Indicates the current input selected.
NOTE: The None value is a
non-selectable value that appears
when you enter a ‘get input’ command
while the projector is in idle mode.