SMAR LD291 Operation And Maintenance Instruction Manual Download

Page: 42 / 84

LD291 - Operation and Maintenance Instruction Manual

4.6

Lower Range Value Adjustment without Reference (LRV)

Moves to the LRV DECREASE function.

Increases the Lower Value until the magnetic tool is removed or the

maximum limit for the Lower Value is reached.

Moves to the URV ADJUSTMENT function.

Decreases the Lower Value until the magnetic tool is removed or the minimum

limit for the Lower Value is reached.

Upper Range Value Adjust without Reference (URV)

Moves to the URV DECREASE function.

Increases the Upper Value until the magnetic tool is removed or the

maximum limit for the Upper Value is reached.

Moves to the ZERO ADJUSTMENT function.

Decreases the Upper Value until the magnetic tool is removed or the minimum

limit for the Upper Value is reached.

Zero Adjust with Reference (ZERO)

Moves to the ZERO DECREASE function.

Increases output in transmitter mode, decreases the Lower Pressure Value

until the magnetic tool is removed or the maximum limit for the Lower Value is
reached. The span is maintained.

Moves to the SPAN ADJUSTMENT function.

Decreases Output in transmitter mode, increases the Lower Pressure Value

until the magnetic tool is removed or the minimum limit for the Lower Value is
reached. The span is maintained.

Span Adjust with Reference (SPAN)

Moves to the SPAN DECREASE function.

Increases the Output in transmitter mode, decreases the Upper Pressure

Value until the magnetic tool is removed or the maximum limit for the Upper
Value is reached.

Summary of Contents for LD291





















































































Search results

Summary of Contents for LD291

Reviews:

Related manuals for LD291

Brands by name

Popular brands

SMAR LD291, Operation And Maintenance Instruction Manual

Search results

Summary of Contents for LD291

Reviews:

Related manuals for LD291

Brands by name

Popular brands