6 Mounting and Preparing the Connection
SMA Solar Technology AG
Operating manual
SHP-US-20-BE-en-10
27
3. Fasten all four screws of each mounting bracket hand-tight (TX40).
4. Ensure the correct position of the mounting brackets by hooking in the mounting template. If
the position is incorrect, move the mounting brackets to the correct position.
5. Tighten all four screws of each mounting bracket (TX40, torque: 12 Nm ± 2 Nm (106 in-lb ±
17.7 in-lb)).
6. Clip the mounting template into the mounting brackets.
7. Align the cable conduits by means of the mounting template and shorten if necessary. Take the
product depth of 400 mm (15.8 in) into account.
8. Check on the connection plate whether the seal is
present and undamaged.
9. Attach the conduit fittings for attachment of the
conduits to the connecting plate.
2
1
10. Lead the cables through the conduit fittings in the
connecting plate and align the connecting plate
using the mounting template.
2
1
11. Remove the mounting template.
Summary of Contents for SHP 125-US-20
Page 95: ......
Page 96: ...www SMA Solar com...
