6 Mounting and Preparing the Connection
SMA Solar Technology AG
Operating manual
SHP-US-20-BE-en-10
28
12. Screw the transport handles as far as they will go
into the taps on the right- and left-hand side until
they lie flush with the enclosure. When doing so,
ensure that the transport handles are screwed into
the taps so that they are perfectly straight. If the
transport handles are not screwed in straight, this
can make it more difficult or even impossible to
unscrew them later on and can damage the taps to
the extent that transport handles can no longer be
screwed into them.
4x
13. Insert a screwdriver into the holes in the transport
handle and turn the screwdriver through 90°. This
ensures that the transport handles are securely
tightened.
90°
4x
14. If the inverter is to be hooked into the mounting brackets by means of a hoist, screw the eye
bolts into the threads on the top of the inverter and attach the hoist to them. The hoist must be
suitable to take the weight of the inverter.
15. Unscrew all screws of the enclosure lid (TX25) and
remove it.
12x
16. Set the screws and the enclosure lid aside and store safely.
17. Hook the product into the mounting brackets. To do
this, guide the product over the cables and the
connecting plate so that the cables protrude through
the opening into the product and the connecting
plate sits under the opening. The bracket must
protrude through the upper opening.
18. Align the cables according to the corresponding terminals and shorten the cables if necessary.
Summary of Contents for SHP 125-US-20
Page 95: ......
Page 96: ...www SMA Solar com...
