6 Mounting and Preparing the Connection
SMA Solar Technology AG
Operating manual
SHP-US-20-BE-en-10
22
6
Mounting and Preparing the Connection
6.1
Requirements for Mounting
Requirements for the Mounting Location:
WARNING
Danger to life due to fire or explosion
Despite careful construction, electrical devices can cause fires.
• Do not mount the product in areas containing highly flammable materials or gases.
• Do not mount the product in potentially explosive atmospheres.
☐ Do not mount the inverter in living areas.
☐ The installation site can be exposed to direct solar irradiation. There is, however, the possibility
that the product reduces its power output to avoid overheating due to high temperatures.
☐ All ambient conditions must be met (see Section 15, page 88).
☐ At least two profile rails must be available for mounting.
☐ The support surface of the frame to which the profile rails are attached should be firm and
level (e.g. concrete). Non-fulfillment of these criteria may restrict servicing.
Requirements for the profile rails:
☐ The profile rails must be designed for the load and orientation of the inverters in the PV system.
The profile rails might need to be reinforced.
☐ The profile rails must be designed for the clamping range of the mounting bracket.
Summary of Contents for SHP 125-US-20
Page 95: ......
Page 96: ...www SMA Solar com...
