12 Troubleshooting
SMA Solar Technology AG
Operating manual
SHP-US-20-BE-en-10
68
Event number
Message, cause and corrective measures
6701
6702
Communication disturbed
Error in the communication processor, the inverter continues feeding in, how-
ever. The cause must be determined by the Service.
Corrective measures:
• If this message is displayed frequently, contact the Service.
7001
7002
7015
Fault sensor interior temperature
The cause must be determined by the Service.
Corrective measures:
• Contact the Service.
7102
Parameter file not found or defective
The parameter file was not found or is defective. Loading the parameter file
has failed. The inverter continues to feed in.
Corrective measures:
• Copy the parameter file to the correct folder again.
7106
Update file defect.
The update file is defective. The update failed. The inverter continues to feed
in.
7110
No update file found
No new update file was found on the SD memory card. The update failed.
The inverter continues to feed in.
7112
Update file successfully copied
7113
The memory card is full or write-protected
7201
7202
Data storage not possible
7303
Update main CPU failed
The cause must be determined by the Service.
Corrective measures:
• Contact the Service.
7320
The device with serial number [xx] was successfully updated to
firmware version [xxx].
The firmware update was completed successfully.
Summary of Contents for SHP 125-US-20
Page 95: ......
Page 96: ...www SMA Solar com...
