SLS Audio Q-Line Silver, Instruction Manual

Page: 11 / 29

To listen with the headphones.
9
• Ensure that the SPEAKER button is set to off.
• When listening to a DTS or Dolby Digital program
source, if the headphones are plugged in and the
SPEAKER button is set to off, it enters the 2-CH
downmix mode automatically. (For details, refer to
“Downmixing into two front channels”on page 18.)
10
When CD, VIDEO 1~3 is selected as an
input source
Select the digital or analog input
connected as desired.
4
• When playing back the program sources with
surround sound, refer to “ENJOYING SURROUND
SOUND” on page 14.
• Each time this button is pressed, the corresponding
input is selected as follows ;
o(ptical) 1 c(oaxial) 1 c(oaxial) 2
A(nalog)
• To listen to a DTS or Dolby Digital program source
in the 2-CH downmix mode, in the stereo mode, the
corresponding digital input should be selected. (For
details, refer to “Downmixing into two front
channels” on page 18.)
Notes :
• When the selected optical or coaxial digital input is
not connected, the selected digital input display
flickers, indicationg that there is no input signal.
(Refer to “ENJOYING SURROUND SOUND” on
page 14.)
• The sound from the component connected to the
selected digital input can be heard regardless of the
selected input source.
Adjust the (overall) volume.
6
Operate the selected component for
playback.
5
• Then “C-EQ ON” is displayed.
• Press it again to cancel, the “C-EQ OFF” is
displayed.
• When the 6 CH DIRECT is selected as an input
source, the cinema EQ function is bypassed.
To compensate for edgy or shrill movie
sound tracks.
7
• “MUTE” will flicker.
• To resume the previous sound level, press it again.
To mute the sound.
8
ENGLISH