SLS Audio Q-Line Silver, Instruction Manual

Page: 12 / 29

11
• Each time this button is pressed, the corresponding
tone mode is selected and shown for 3 seconds as
follows:
BASS TRBL(treble)
Note: When the TONE DIRECT indicator is lit,
bass and treble settings can not be adjusted.
Enter the tone mode.
10
• When TONE DIRECT indicator lit, tone circuitry
is bypassed.
• To toggle the tone circuitry back on, press button
again.
To listen to a program source without tone
adjustments, press TONE DIRECT button.
12
• If the tone display disappears, start from the step 10
again.
Notes:
• Extreme settings at high volume may damage your
speakers.
• When the digital signals from DTS or Dolby Digital
program sources are input in available surround
mode, the tone controls are bypassed.
At the desired tone mode, adjust the tone
as desired.
11
Adjusting the tone (bass and treble)
ENGLISH