SLS Audio Q-Line Silver, Instruction Manual

Page: 17 / 29

ENGLISH
16
Adjusting the speaker settings
Press the SPEAKER MODE button for
more than 2 seconds to enter the front-
center-rear speaker mode.
6
Select the desired speaker setting.
7
• The front-center-rear speaker setting is displayed.
• When the SPEAKER on/off switch is set to off, or
when the 6 CH DIRECT is selected as the input
source, the speaker mode button will not function.
• When in STEREO mode, the SPEAKER MODE
switch will only adjust the subwoofer setting.
• Adjust the settings of front, center, rear speakers and
subwoofer.
• If the speaker setting is adjusted to “S”, the low
frequency bass sound of the channel(s) is redirected to
the subwoofer or the front channels. If the speaker
setting is adjusted to "N" (for None), the sound of the
channel(s) is redirected to other channels.
• Each time this button is pressed, one of 11 different
speaker settings is selected and displayed for 8
seconds as follows;
(FS-CS-RS) (FS-CS-RN) (FS-CN-RS)
(FL-CS-RS) (FL-CL-RS) (FL-CL-RL)
(FL-CL-RN) (FL-CS-RL) (FL-CN-RL)
(FL-CS-RN) (FL-CN-RS)
• In the displays, F stands for Front, C for Center, R
for Rear, L for Large, S for Small and N for None.
• When judging whether a speaker is Large or Small,
please note that a standard large speaker can fully
reproduce sounds below 80 Hz.
• Some speaker settings are not available. For
example, Front: Small, Center: Large, Rear: Large
(FS-CL-RL) and any settings where BOTH center
and rear speakers are turned off.
Select the desired subwoofer setting.
9
• The desired speaker setting is memorized and then it
enters the subwoofer mode.
• If the speaker setting display disappears, start from
the above step 6 again.
• Each time this button is pressed, the subwoofer setting
changes and is displayed for 8 seconds as follows;
SUB W(oofer) - Y(es): When using a subwoofer.
SUB W(oofer) - N(o) : When not using a subwoofer.
• When the front speakers are set to “S”, the subwoofer
is automatically set to “Y”.
Memorize the desired speaker setting
while it is displayed.
8
• If the subwoofer setting display disappears, start
from the above step 6 again.
• Each time this button is pressed briefly, the front-
center-rear speaker or subwoofer setting is displayed.
Memorize the subwoofer setting while it
is displayed.
10
Checking the speaker setting
Note: You do not need to adjust speaker and subwoofer
settings when using QS system speakers. Your
QS-AVR500 receiver speaker settings are preset
to all speakers as small (FS-CS-RS) and
subwoofer "Yes" for optimal sound quality and
ease of operaion with your QS speakers.