Door 1
Door 2
CCTV 1
CCTV 2
Input
Output
Power
TV out
Door 1
Door 2
CCTV 1
CCTV 2
Input
Output
Power
TV out
Door 1
Door 2
CCTV 1
CCTV 2
Input
Output
Power
TV out
Door 1
Door 2
Output
Ext. Power
ISP
CCTV1
CCTV2
{ Design. Uniqueness. Innovation }
DESIGN
DIRECT
SERIES
7
8
SL-07M (Slave)
SL-07M (Slave)
SL-07M (Slave)
Audio
GND
Data
Video
SL-10IP (Master)
Diagram 2. SL-10IP and SL-07M system connection.
Notes:
* Use «Power» plug on the monitor to connect external power 13,5 V. While use external power
supply please keep main power cord ~100-240 V disconnected from the outlet, otherwise it can damage
monitor circuits.
** Door panels, cameras, power supplys, locks and other additional equipment described on the schemes
are optional devices and aren’t included into monitors kit.
4.3 Unit mount
1) Take the surface mount bracket from the kit and situate it 150-160 cm from the floor line.
2) Mark and drill four halls in the wall.
3) Take four nuts from the kit and hammer them into the drilled halls.
4) Fix surface mount bracket on the wall by four screws from the kit.
5) Connect all communication wires and fix the monitor on the surface mount bracket.
Audio
GND
Data
Video
Audio
GND
Data
Video
Audio
GND
Data
Video
Audio
GND
Da
ta
Video
