Installation
(One-piece King bases)
STEP 1: Remove packing materials
www.SleepNaturalNow.com
Put the bed base in a desired place with the bottom of the
box facing up. Remove box cover, take out all of the
packing materials and put aside. Make sure not to
puncture the bed with any sharp objects. Flatten the folded
base as picutred.
STEP 2: One-piece King structure installation
R) Connecting
Bolt
H) Large
Washer
S) Non-slip nuts
A) Remove all parts from the accessory box, connecting
and installing as pictured (large washers should be
installed back and front).
K) Short Bolt
L) Small Washers
B) Install the KD Combination Parts as shown in the
following pictures. Tighten the bolts.
