background image

MURDOCK  MFG.  • 

15125  Proctor  Avenue  •  City  of  Industry,  CA  91746  USA 

Phone  800-453-7465  or  626-333-2543  •  Fax  626-855-4860  •  www.murdockmfg.com

Member of

CONTEMPORARY WATER COOLERS

 

INSTALLATION/MAINTENANCE  INSTRUCTIONS

 PET FOUNTAIN

      

7020-967-001     

Date: 04/19/21

 

COMPLIES 

WITH

TECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER: 

1.800.591.9360

Technical Assistance Fax: 1.626.855.4894

Murdock™ assumes no responsibility for use 
of void or superseded data. © Copyright 
Murdock Mfg., City of Industry, CA  Member of  
Morris Group International. Please visit 

www.murdockmfg.com

 

for most current 

specifications.

GRT75-PF & GRT75-PF-RFS Series

Outdoor Pet Fountain

GRT75-PF SHOWN

 

 

 

 

IMPORTANT: INSTALLATION AND SITE PREP FOR FREEZE RESISTANT OPTIONS “-FRU, -NP, -FRA” WILL 
DIFFER FROM STANDARD! REFER TO DESIGNATED FREEZE RESISTANT INSTALLATION DETAILS PRIOR TO 
ROUGH-IN AND FIXTURE INSTALL FOR -FRU, -NP, -FRA SERIES OPTIONS. FOR ADDITIONAL INFORMATION 
VISIT: 

 OR CONTACT YOUR LOCAL SALES REPRESENTATIVE.

www.MurdockMfg.com/Resources

Murdock warrants that its products are free from defects in material or workmanship under normal use and service for a period of 
one year from date of shipment from the factory. Murdocks’s liability under this warranty shall be discharged solely by repair or 
replacement of defective material, provided Murdock is notified in writing within the time periods described above. 

LIMITED WARRANTY - UNITED STATES & CANADA

NOTES TO INSTALLER:

1. Please leave this documentation with the owner of the fixture when finished. 
2. Please read this entire booklet before beginning the installation. 
3. Check your installation for compliance with plumbing, electrical and other applicable codes.

LIMITED EXPORT WARRANTY - One year on parts only. 

This warranty does not cover installation or labor charges and does not apply to materials, which have been damaged by other 
causes such as mishandling or improper care or abnormal use. The repair or replacement of the defective materials shall 
constitute the sole remedy of the Buyer and the sole remedy of Murdock under this warranty. Murdock shall not be liable under 
any circumstances for incidental, consequential or direct charges caused by defects in the materials, or any delay in the repair or 
replacement thereof.  This warranty is in lieu of all other warranties expressed or implied. Product maintenance instructions are 
issued with each unit and disregard or non-compliance with these instructions will constitute an abnormal use condition and void 
the warranty. Stainless steel must be protected on jobsite during construction and must be properly maintained after the water 
has been introduced into the water cooler or drinking fountain, or Murdocks’s limited warranty is void.

IMPORTANT: INSTALLATION AND SITE PREP FOR FREEZE RESISTANT OPTIONS “-FRU, -NP, -FRA” WILL 
DIFFER FROM STANDARD! REFER TO DESIGNATED FREEZE RESISTANT INSTALLATION DETAILS PRIOR TO 
ROUGH-IN AND FIXTURE INSTALL FOR -FRU, -NP, -FRA SERIES OPTIONS. FOR ADDITIONAL INFORMATION 
VISIT: 

 OR CONTACT YOUR LOCAL SALES REPRESENTATIVE.

www.MurdockMfg.com/Resources

LIMITED EXPORT WARRANTY - One year on parts only. 

This warranty does not cover installation or labor charges and does not apply to materials, which have been damaged by 
other causes such as mishandling or improper care or abnormal use. The repair or replacement of the defective materials 
shall constitute the sole remedy of the Buyer and the sole remedy of Murdock under this warranty. Murdock shall not be 
liable under any circumstances for incidental, consequential or direct charges caused by defects in the materials, or any 
delay in the repair or replacement thereof.  This warranty is in lieu of all other warranties expressed or implied. Product 
maintenance instructions are issued with each unit and disregard or non-compliance with these instructions will constitute 
an abnormal use condition and void the warranty. Stainless steel must be protected on jobsite during construction and must 
be properly maintained after the water has been introduced into the water cooler or drinking fountain, or Murdocks’s limited 
warranty is void.

NOTES TO INSTALLER:

1. Please leave this documentation with the owner of the fixture when finished. 
2. Please read this entire booklet before beginning the installation. 
3. Check your installation for compliance with plumbing, electrical and other applicable codes.

Murdock warrants that its products are free from defects in material or workmanship under normal use and service for a 
period of one year from date of shipment from the factory. Murdocks’s liability under this warranty shall be discharged solely 
by repair or replacement of defective material, provided Murdock is notified in writing within the time periods described 
above. 

LIMITED WARRANTY - UNITED STATES & CANADA

 

 

 

IMPORTANT: INSTALLATION AND SITE PREP FOR FREEZE RESISTANT OPTIONS “-FRU, -NP, -FRA” WILL 
DIFFER FROM STANDARD! REFER TO DESIGNATED FREEZE RESISTANT INSTALLATION DETAILS PRIOR TO 
ROUGH-IN AND FIXTURE INSTALL FOR -FRU, -NP, -FRA SERIES OPTIONS. FOR ADDITIONAL INFORMATION 
VISIT: 

 OR CONTACT YOUR LOCAL SALES REPRESENTATIVE.

www.MurdockMfg.com/Resources

LIMITED WARRANTY - UNITED STATES & CANADA

Murdock warrants that its products are free from defects in material or workmanship under normal use and service for a period of 
one year from date of shipment from the factory. Murdocks’s liability under this warranty shall be discharged solely by repair or 
replacement of defective material, provided Murdock is notified in writing within the time periods described above. 

NOTES TO INSTALLER:

1. Please leave this documentation with the owner of the fixture when finished. 
2. Please read this entire booklet before beginning the installation. 
3. Check your installation for compliance with plumbing, electrical and other applicable codes.

This warranty does not cover installation or labor charges and does not apply to materials, which have been damaged by other 
causes such as mishandling or improper care or abnormal use. The repair or replacement of the defective materials shall 
constitute the sole remedy of the Buyer and the sole remedy of Murdock under this warranty. Murdock shall not be liable under 
any circumstances for incidental, consequential or direct charges caused by defects in the materials, or any delay in the repair or 
replacement thereof.  This warranty is in lieu of all other warranties expressed or implied. Product maintenance instructions are 
issued with each unit and disregard or non-compliance with these instructions will constitute an abnormal use condition and void 
the warranty. Stainless steel must be protected on jobsite during construction and must be properly maintained after the water 
has been introduced into the water cooler or drinking fountain, or Murdocks’s limited warranty is void.

LIMITED EXPORT WARRANTY - One year on parts only. 

 

 

 

IMPORTANT: INSTALLATION AND SITE PREP FOR FREEZE RESISTANT OPTIONS “-FRU, -NP, -FRA” WILL 
DIFFER FROM STANDARD! REFER TO DESIGNATED FREEZE RESISTANT INSTALLATION DETAILS PRIOR TO 
ROUGH-IN AND FIXTURE INSTALL FOR -FRU, -NP, -FRA SERIES OPTIONS. FOR ADDITIONAL INFORMATION 
VISIT: 

 OR CONTACT YOUR LOCAL SALES REPRESENTATIVE.

www.MurdockMfg.com/Resources

NOTES TO INSTALLER:

1. Please leave this documentation with the owner of the fixture when finished. 
2. Please read this entire booklet before beginning the installation. 
3. Check your installation for compliance with plumbing, electrical and other applicable codes.

This warranty does not cover installation or labor charges and does not apply to materials, which have been damaged by other 
causes such as mishandling or improper care or abnormal use. The repair or replacement of the defective materials shall 
constitute the sole remedy of the Buyer and the sole remedy of Murdock under this warranty. Murdock shall not be liable under 
any circumstances for incidental, consequential or direct charges caused by defects in the materials, or any delay in the repair or 
replacement thereof.  This warranty is in lieu of all other warranties expressed or implied. Product maintenance instructions are 
issued with each unit and disregard or non-compliance with these instructions will constitute an abnormal use condition and void 
the warranty. Stainless steel must be protected on jobsite during construction and must be properly maintained after the water 
has been introduced into the water cooler or drinking fountain, or Murdocks’s limited warranty is void.

LIMITED WARRANTY - UNITED STATES & CANADA

Murdock warrants that its products are free from defects in material or workmanship under normal use and service for a period of 
one year from date of shipment from the factory. Murdocks’s liability under this warranty shall be discharged solely by repair or 
replacement of defective material, provided Murdock is notified in writing within the time periods described above. 

LIMITED EXPORT WARRANTY - One year on parts only. 

 

 

 

IMPORTANT: INSTALLATION AND SITE PREP FOR FREEZE RESISTANT OPTIONS “-FRU, -NP, -FRA” WILL 
DIFFER FROM STANDARD! REFER TO DESIGNATED FREEZE RESISTANT INSTALLATION DETAILS PRIOR TO 
ROUGH-IN AND FIXTURE INSTALL FOR -FRU, -NP, -FRA SERIES OPTIONS. FOR ADDITIONAL INFORMATION 
VISIT: 

 OR CONTACT YOUR LOCAL SALES REPRESENTATIVE.

www.MurdockMfg.com/Resources

LIMITED EXPORT WARRANTY - One year on parts only. 

Murdock warrants that its products are free from defects in material or workmanship under normal use and service for a 
period of one year from date of shipment from the factory. Murdocks’s liability under this warranty shall be discharged solely 
by repair or replacement of defective material, provided Murdock is notified in writing within the time periods described 
above. 

LIMITED WARRANTY - UNITED STATES & CANADA

This warranty does not cover installation or labor charges and does not apply to materials, which have been damaged by 
other causes such as mishandling or improper care or abnormal use. The repair or replacement of the defective materials 
shall constitute the sole remedy of the Buyer and the sole remedy of Murdock under this warranty. Murdock shall not be 
liable under any circumstances for incidental, consequential or direct charges caused by defects in the materials, or any 
delay in the repair or replacement thereof.  This warranty is in lieu of all other warranties expressed or implied. Product 
maintenance instructions are issued with each unit and disregard or non-compliance with these instructions will constitute 
an abnormal use condition and void the warranty. Stainless steel must be protected on jobsite during construction and must 
be properly maintained after the water has been introduced into the water cooler or drinking fountain, or Murdocks’s limited 
warranty is void.

NOTES TO INSTALLER:

1. Please leave this documentation with the owner of the fixture when finished. 
2. Please read this entire booklet before beginning the installation. 
3. Check your installation for compliance with plumbing, electrical and other applicable codes.

 

 

 

IMPORTANT: INSTALLATION AND SITE PREP FOR FREEZE RESISTANT OPTIONS “-FRU, -NP, -FRA” WILL 
DIFFER FROM STANDARD! REFER TO DESIGNATED FREEZE RESISTANT INSTALLATION DETAILS PRIOR TO 
ROUGH-IN AND FIXTURE INSTALL FOR -FRU, -NP, -FRA SERIES OPTIONS. FOR ADDITIONAL INFORMATION 
VISIT: 

 OR CONTACT YOUR LOCAL SALES REPRESENTATIVE.

www.MurdockMfg.com/Resources

Murdock warrants that its products are free from defects in material or workmanship under normal use and service for a period of 
one year from date of shipment from the factory. Murdocks’s liability under this warranty shall be discharged solely by repair or 
replacement of defective material, provided Murdock is notified in writing within the time periods described above. 

LIMITED WARRANTY - UNITED STATES & CANADA

NOTES TO INSTALLER:

1. Please leave this documentation with the owner of the fixture when finished. 
2. Please read this entire booklet before beginning the installation. 
3. Check your installation for compliance with plumbing, electrical and other applicable codes.

This warranty does not cover installation or labor charges and does not apply to materials, which have been damaged by other 
causes such as mishandling or improper care or abnormal use. The repair or replacement of the defective materials shall 
constitute the sole remedy of the Buyer and the sole remedy of Murdock under this warranty. Murdock shall not be liable under 
any circumstances for incidental, consequential or direct charges caused by defects in the materials, or any delay in the repair or 
replacement thereof.  This warranty is in lieu of all other warranties expressed or implied. Product maintenance instructions are 
issued with each unit and disregard or non-compliance with these instructions will constitute an abnormal use condition and void 
the warranty. Stainless steel must be protected on jobsite during construction and must be properly maintained after the water 
has been introduced into the water cooler or drinking fountain, or Murdocks’s limited warranty is void.

LIMITED EXPORT WARRANTY - One year on parts only. 

 

 

 

IMPORTANT:  INSTALLATION AND  SITE  PREP  FOR  FREEZE  RESISTANT  OPTIONS  “-FRU,  -NP”  WILL  DIFFER 
FROM  STANDARD!  REFER  TO  DESIGNATED  FREEZE  RESISTANT  INSTALLATION  DETAILS  PRIOR  TO 
ROUGH-IN AND FIXTURE INSTALL FOR -FRU, -NP SERIES OPTIONS. FOR ADDITIONAL INFORMATION VISIT: 

www.MurdockMfg.com/Resources

 OR CONTACT YOUR LOCAL SALES REPRESENTATIVE.

NOTES TO INSTALLER:

1. Please leave this documentation with the owner of the fixture when finished. 
2. Please read this entire booklet before beginning the installation. 
3. Check your installation for compliance with plumbing, electrical and other applicable codes.

LIMITED WARRANTY - UNITED STATES & CANADA

Murdock warrants that its products are free from defects in material or workmanship under normal use and service for a period 
of one year from date of shipment from the factory. Murdocks’s liability under this warranty shall be discharged solely by repair 
or replacement of defective material, provided Murdock is notified in writing within the time periods described above. 

This warranty does not cover installation or labor charges and does not apply to materials, which have been damaged by 
other causes such as mishandling or improper care or abnormal use. The repair or replacement of the defective materials 
shall constitute the sole remedy of the Buyer and the sole remedy of Murdock under this warranty. Murdock shall not be liable 
under any circumstances for incidental, consequential or direct charges caused by defects in the materials, or any delay in the 
repair or replacement thereof.   This warranty is in lieu of all other warranties expressed or implied. Product maintenance 
instructions are issued with each unit and disregard or non-compliance with these instructions will constitute an abnormal use 
condition  and  void  the  warranty.  Stainless  steel  must  be  protected  on  jobsite  during  construction  and  must  be  properly 
maintained after the water has been introduced into the water cooler or drinking fountain, or Murdocks’s limited warranty is 
void.

LIMITED EXPORT WARRANTY - One year on parts only. 

Member of

15125 Proctor Ave, City of Industry,

CA, 91746 U.S.A.

Phone 800-591-9360

626-336-4561

Fax 626-855-4894

www.murdockmfg.com

 

Date: 04/19/21

7020-967-001     

Federal
Public Law
111-380 
(No Lead)

Summary of Contents for GRT75-PF Series








Reviews: