www.SleepNaturalNow.com
STEP 2: Remove the bed from the box
STEP 1: Remove packing materials
Remove the bed base from the box keeping the bottom of
the base facing upwards. Install the 4 legs to the four
corners as shown. Tighten the legs by hand. Ensure the
legs are secured tightly.
Install the headboard brackets at the same time if
attaching to a headboard. See page 19.
Carefully turn the base over using two people. Do not lay
the base on its side to prevent damage to the side button,
fabric or legs.
STEP 4: Connect power supply
Plug the power cord into the power supply as shown.
To prevent damage to the Power Supply (Part D), please
ensure the Power Supply is placed outside the perimeter
of the adjustable base frame.
The batteries for flat the base when it's power off. (This
step also applies to the bed of KD structure.)
STEP 3: Carefully turn over the bed base
Installation
(Queen or Twin XL Bases)
Put the bed base in a desired place with the bottom of the
box facing up. Remove box cover, take out all of the
packing materials and put aside. Make sure not to
puncture the bed with any sharp objects.
