2
EUTECTIC EC-10 DV
Maximum operating pressure 414 kPa (60 psi).
All boilers hydrostatically tested — A.S.M.E.
* For forced hot water heating systems where the boiler and all piping are locat-
ed within the area to be heated, the boiler may be selected on the basis of
D.O.E. capacity output. The net output ratings shown are based on an
allowance for piping and pickup of 1.15 (water). D.O.E. capacity output is
divided by the allowance to obtain net rating. The Slant/Fin Technical Service
department should be consulted before selecting a boiler for unusual piping
and pickup requirements such as intermittent system operation, extensive pip-
ing, etc.
† Ratings apply to the use of light oil at 11000 W/L (140,000 Btu per gallon) and
apply only when burner models listed on pages 8 of this manual are used, and
are properly adjusted to produce 13% CO2.
# All dimensions subject to normal manufacturing tolerance.
NOTE: All boilers under 87.9 kw (300,000 Btuh) input are tested and rated for
capacity under the U.S. Department of Energy (D.O.E.) Test Procedures for Boil-
ers.
TABLE 1: Ratings and Dimensions
Figure 1: Dimensions
Boiler
Model No.
OIL INPUT
GROSS
OUTPUT
NET OUT-
PUT
. DIMENSIONS .
APPROX.
OVERALL
LENGTH
"A"
BOILER
LENGTH
"B"
BOILER
LENGTH
"C"
FLUE DIA
"D"
DISTANCE
BETWEEN
LEGS
"E"
FLUE
OUTLET
LENGTH
"F"
mL/s
GPH
Watts
BTU/H
kW
MBH
kW
MBH
mm
in mm
in.
mm
in.
mm
in. mm
in.
mm in.
EC-13DV
0.72
0.68
26,672
91,000
23
79
20
69
87
914
36 25 22-1/4 686
27
127
5
300 11-13/16 51
2
EC-14DV
0.84
0.80
“32,827” “112,000” 29
98
25
85
87 1041 41 25 27-1/4 813
32
127
5
300 16-13/15 51
2
EC-15DV
1.05
1.00
“41,034” “140,000” 36
123
31
107
87 1168 46 25 32-1/4 940
37
127
5
427 21-13/16 51
2
EC-16DV
1.21
1.15
“47,189” “161,000” 41
141
36
123
87 1295 51 25 37-1/4 1067
42
152
6
427 26-13/16 102
4
AFUE %
835mm (32-7/8")
32mm (1-1/4")
threaded supply
60mm (2-23/64)
163mm
(6-27/64)
79mm (11-3/8)
Note: Add 203mm (8") to B dimensions to allow for Riello burner
289mm (1-1/8)
570mm (22-7/16)
355mm
(13-3/32)
195mm (7-11/16)
Relief valve
19mm (3/4")
32mm (1-1/4)
threaded return
pipe
285mm (11-7/32)
570mm (22-7/16)
563mm(22-11/64)
394mm(15-1/2)
138mm(5-7/16)
113mm
(4-7/16)
156mm
(6-9/64")
(4) 3/8-16 studs
on
∅
6-29/32 4
markings on
∅
176mm (6-15/16)
∅
110mm
(4-21/64) hole
∅
130mm
(6-7/64) cut-out
