19. Using a ladder to reach the top of your enclosure net,
tie one end of the Tightening Cord (26) to a Pole Cap.
Pull the Tightening cord tight, then attach the other end
of the Tightening Cord (26) to the next closest Pole Cap.
Make sure to keep the Cord pulled tight. Now attach
the four Straps on the top of the Backboard (25) to the
Tightening Cord and tie knots to secure.
Thread the two straps located on the middle back of
the Backboard through the enclosure net and tie.
34
35
28
39 38
20. Attach the Upper Upright Pole (34) to the Lower
Upright Pole (35) with M8x42mm Bolt (28), M8
Washer with Arc (38) and M8 LockNut (39).
20
19
27
Assembly and Attachment of Volleyball Net
26
25
Strap
!
Pole Cap
If any
Note:
cord
is left over, tie another knot 6 inches
below the pole cap and cut off the excess.
Do not leave any extra
cord
below the second
knot, doing so can cause an entrapment hazard.
