Skywalker SWSAS1500 User Manual Download Page 30

Page: 30 / 32

29. Choose a straight edge to attach the Bounce Back Game (40)

between two enclosure uprights. The ball storage pocket is

at the bottom of the game. Adjust accordingly for the user’s

height. Tighten the straps so the game does not sag or slip

down the enclosure poles. Do not over tighten and damage

the straps or the netting material.

WARNING:

All users should be behind the one who is playing the game. Do not allow other users to be to the side or in front

of the game while the game is in use.

CAUTION:

Users should remove the game while not in use or in the case of high wind or snow.

Disassembly

To disassemble the enclosure and trampoline, follow assembly steps 1 through 11 in reverse order.

Replacing the Enclosure net

If your Enclosure net is damaged after using over a period of time, you will need to replace it by following assembly steps

5-8 and 11-15 in reserve order.

Attachment of Bounce Back Game

straight edge

Summary of Contents for SWSAS1500

































Search results

Summary of Contents for SWSAS1500

Reviews:

Related manuals for SWSAS1500

Brands by name

Popular brands

Skywalker SWSAS1500, User Manual

Search results

Summary of Contents for SWSAS1500

Reviews:

Related manuals for SWSAS1500

Brands by name

Popular brands