background image

Storing the Trampoline Enclosure Safely

Specific steps for storing the trampoline enclosure are given later in this manual. There are special safety precautions to 

be aware of when storing the enclosure.

Remove the enclosure poles and place them on the ground. Avoid pinching your fingers by wearing gloves and keeping 

your fingers away from pinch points near the bracket assembly while you are removing the tubes from the frame.

Placing the Trampoline and Enclosure in a Safe Place

 

There must be at least 24 feet (7.3 meters) of clear, open space above the ground. Do not place or store anything under-

neath the trampoline and enclosure.  To avoid injury, the trampoline and enclosure must be kept away from objects and 

possible hazards including electric power wiring, tree limbs, and fences. Do not place the trampoline and enclosure near 

any other recreational devices or structures such as a swimming pool or swing set.  The trampoline and enclosure must be 

placed on a level surface before use. The area around the trampoline must always have plenty of light.

For the Supervisor

•  Be familiar with the information in this manual and enforce all of the safety rules. Help all users to utilize the 

   trampoline and enclosure safely.
•  All trampoline and enclosure users must have someone to supervise them at all times, regardless of the skill or age of

   the user.
•  Secure the trampoline and enclosure against unauthorized and unsupervised use. Keep the trampoline and enclosure

   free of any objects that could interfere with the jumper.
•  This trampoline and enclosure is not recommended for use by children under 6 years of age or by anyone weighing

   more than 250 pounds.
•  Use the trampoline and enclosure only when the trampoline mat (bed) is clean and dry. Inspect the trampoline and

   enclosure prior to each use and replace any worn or damaged parts. Use only when the enclosure netting has no holes,

   all uprights are tightly bolted into their sockets, and the netting is properly suspended.
•  

DO NOT

 attempt or allow somersaults on the trampoline. Landing on the back or neck can cause serious injury, 

   paralysis, or death, even when landing in the middle of the bed.

For the Jumper

Do not use the trampoline enclosure when under the influence of drugs or alcohol.

JUMPING

•  Avoid jumping too high or for too long. Always control your jump.
•  Take turns jumping one at a time, and always have someone watch you.
•  Do not attempt to jump over the netting. Do not intentionally bounce off of the netting. Do not hang from, kick, cut, or

   climb on the netting.
•  Wear clothing that does not have drawstrings, hooks, loops or anything else that could get caught while using the

   trampoline/enclosure and result in entanglement or strangulation, or both.
•  Do not attach anything to the netting that is not a Skywalker Trampolines approved accessory or part of the of the

   trampoline enclosure.

8

WARNING

Summary of Contents for SWSAS1500

































Reviews: