Skyjack SJ9233 RT, Operation Manual

Page: 71 / 122

71
SJ9233 RT, SJ9243 RT, SJ9253 RT, SJ9664 RT 221491AFA
Refuel Section 6 – Additional Procedures
11. Install the control cable into the railing clamp
and install the lock-pin .
WARNING
Fall Hazard. Use the three points of contact
principle when you use the MEWP ladder to enter
or exit the platform. If you do not obey, there is a
risk of death or serious injury.
12. Use the MEWP ladder to exit the platform.
13. Connect the platform control console cable to
the electrical connector below the platform.
6.4 Refuel
WARNING
Do not start the MEWP if you smell gas. Lock and
tag the MEWP, and remove it for servicing. If you
do not obey, there is a risk of death or serious
injury.
WARNING
Do not operate a MEWP that does not function
correctly. Lock and tag the MEWP, and remove it
for servicing. Only a qualified service technician
must repair the MEWP. If you do not obey, there is
a risk of death or serious injury.
WARNING
Explosion hazard. Only refuel the MEWP in a well-
ventilated area, away from open flame and other
sources of ignition, approved by your employer
and/or supervisor. Always have an approved fire
extinguisher that you can easily access. If you do
not obey, there is a risk of death or serious injury.
WARNING
Explosion hazard. Do not smoke in an area where
MEWPs are kept or refueled. If you do not obey,
there is a risk of death or serious injury.
IMPORTANT
Before you use the MEWP, make sure that there is
sufficient fuel for the estimated task.