66
221491AFA
SJ9233 RT, SJ9243 RT, SJ9253 RT, SJ9664 RT
Section 5 – Operation
Raise and lower with the SGLE platform control console (optional equipment)
5.11 Raise and lower with
the SGLE platform
control console (optional
equipment)
1.
Energize the platform control console.
2.
Move the
lift/off/drive
switch to the lift position.
WARNING
Look for overhead obstructions or other possible
hazards around the MEWP when you raise the
platform. Do not lower the platform unless the area
below is clear of personnel and obstructions. If
you do not obey, there is a risk of death or serious
injury.
3.
Push and hold the
SGLE
push-button and
squeeze the
function-enable
switch.
4.
Push the
controller handle
until you are at the
necessary height.
5.
Squeeze the
function-enable
switch.
6.
Pull the
controller handle
to lower the platform.
NOTE
The SGLE does not have an effect on these functions:
lower, drive, steer, auto-level, or emergency-lowering.
7.
Release the
controller handle
until it goes
back to the center position to stop. Release the
function-enable
switch.
5.12 Engage or disengage the
differential lock
1.
Move the
auto-level/differential lock
switch to
the differential lock position.
2.
Drive the MEWP.
5.13 MEWP shutdown
WARNING
Look for overhead obstructions or other possible
hazards around the MEWP when you raise the
platform. Do not lower the platform unless the area
below is clear of personnel and obstructions. If
you do not obey, there is a risk of death or serious
injury.
1.
Select a reasonably well-protected location to
park the MEWP. This location must have a firm,
level surface, clear of obstructions, and traffic.
2.
Fully lower the platform.
3.
Push the
emergency-stop
button.
WARNING
Fall Hazard. Use the three points of contact
principle when you use the MEWP ladder to enter
or exit the platform. If you do not obey, there is a
risk of death or serious injury.
4.
Use the MEWP ladder to exit the platform.
5.
Turn the
off/base/platform key
switch to the
off position on the base control console and
remove the key.
6.
Push the
emergency-stop
button.
7.
Turn the
main power disconnect
switch to the
off position.
Summary of Contents for SJ9233 RT
