Skyjack SJ7127 RT Operating Manual Download Page 91

Page: 91 / 94

Rough Terrain Scissors

December 2007

Page 91

Section 5

Labels

No. Label Pictorial

Description

Powered Extension Platform Enable

Select to enable powered extension platform controls.

Powered Extension Platform Extend/Retract

Select “

“ to extend or “

“ to retract powered

extension platform.

Outrigger Controls with Generator

Select “

” to retract or “

“ to extend for each outrigger.

Select “

” to enable or “

” disable generator.

Indicates leveling system status:

Off:

The outriggers are fully retracted.

Flashing Rapidly:

The outriggers are extending or

retracting.

Flashing:

Not all outrigger legs have firm ground contact

or aerial platform is not level.

On:

The outriggers are extended and the platform is

level.

Automatic Outrigger Controls

Select “

” to retract all outriggers or “

” to extend all

outriggers with automatic leveling.

Select “

” to enable manual or automatic outrigger controls.

Auxiliary Control Consoles

Summary of Contents for SJ7127 RT































































































Search results

Summary of Contents for SJ7127 RT

Reviews:

Related manuals for SJ7127 RT

Brands by name

Popular brands

Skyjack SJ7127 RT, Operating Manual

Search results

Summary of Contents for SJ7127 RT

Reviews:

Related manuals for SJ7127 RT

Brands by name

Popular brands