Skyjack SJ7127 RT Operating Manual Download Page 10

Page: 10 / 94

Page 10

December 2007

Rough Terrain Scissors

Safety Rules

Section 1 - About Your Aerial Platform

Safety Precautions (Continued)

Know and understand the safety precautions before going on to next section.

• DO NOT

use the aerial platform

without guardrails, locking pins
and the entry gate(s) in place.

•

DO NOT

use under influence

of alcohol or drugs.

• STUNT

driving and horseplay are prohibited.

• DO NOT

exceed the rated

capacity of the aerial platform.

• DO NOT

distribute load

unevenly.

•

DO NOT

operate if aerial

platform is not working properly
or if any parts are damaged or
worn.

•

DO NOT

leave aerial platform

unattended with key in key
switch.

•

DO NOT

attempt to free a snagged platform with

lower controls until personnel are removed from
the platform.

• DO NOT

position the aerial platform against

another object to steady the platform.

• DO NOT

place materials on the guardrails

or materials that exceed the confines of the
guardrails unless approved by Skyjack.

Summary of Contents for SJ7127 RT































































































Search results

Summary of Contents for SJ7127 RT

Reviews:

Related manuals for SJ7127 RT

Brands by name

Popular brands

Skyjack SJ7127 RT, Operating Manual

Search results

Summary of Contents for SJ7127 RT

Reviews:

Related manuals for SJ7127 RT

Brands by name

Popular brands