Skyjack SJ7127 RT Operating Manual Download Page 22

Page: 22 / 94

Page 22

December 2007

Rough Terrain Scissors

Visual & Maintenance Inspection

Section 2 - Familiarization

It is the responsibility of the operator to read, completely understand and follow all instructions and warnings

contained in this operating manual and on the aerial platform.

2.3-8 Engine Compartment

WARNING

Beware of hot engine components.

1. Pull on the two latches to pull out engine

compartment.

•

Engine Control Console

Ensure muffler and exhaust system are
properly secured, with no evidence of
damage.

•

Radiator

Ensure radiator is secure.

Ensure there are no loose or missing
parts and there is no visible damage.

Check coolant level and add as
needed.

•

Muffler and Exhaust

Ensure muffler and exhaust system are
properly secured, with no evidence of
damage.

•

Engine Tray

Ensure there are no loose or missing
parts and no visible damage to the engine
tray. Ensure that both tray-securing bolts
are in place.

Radiator

Muffler and Exhaust

Engine

Battery

Engine Air Filter

Hydraulic Pump

Engine Tray

Engine Control
Console

Typical Model 71xx shown

FAMILIARIZA

TION

FAMILIARIZA

TION

Summary of Contents for SJ7127 RT































































































Search results

Summary of Contents for SJ7127 RT

Reviews:

Related manuals for SJ7127 RT

Brands by name

Popular brands

Skyjack SJ7127 RT, Operating Manual

Search results

Summary of Contents for SJ7127 RT

Reviews:

Related manuals for SJ7127 RT

Brands by name

Popular brands