Skyjack SJ7127 RT Operating Manual Download Page 88

Page: 88 / 94

Page 88

December 2007

Rough Terrain Scissors

Labels

Section 5

No. Label Pictorial

Description

Lanyard Anchorage Point

Attach anchorage harness lanyard here.

Welder Mounting Location

Welder and tray must be located within boundary of guard rails.
Tray must be mounted on midrail and one vertical post to restrict
movement.

Falling Hazard - Railing Pins (Horizontal) (If Equipped)

WARNING! Falling Hazard. Make sure hinged railing is pinned
properly.

Falling Hazard - Railing Pins (Vertical) (If Equipped)

WARNING! Falling Hazard. Make sure hinged railing is pinned
properly.

Connect Air Supply (If Equipped)

Connect platform air supply here.

138212AA

6.9 BAR

100 PSI

Lanyard Anchorage

Welder Tray

Railing Pins

Air Line to Platform

139820AA

CAUTION

Welder and tray must be located within the boundry

of guard rails. Tray must be mounted on the midrail

and one vertical post to restrict movement.

Summary of Contents for SJ7127 RT































































































Search results

Summary of Contents for SJ7127 RT

Reviews:

Related manuals for SJ7127 RT

Brands by name

Popular brands

Skyjack SJ7127 RT, Operating Manual

Search results

Summary of Contents for SJ7127 RT

Reviews:

Related manuals for SJ7127 RT

Brands by name

Popular brands