Page 30
December 2007
Rough Terrain Scissors
Function Tests
Section 2 - Familiarization
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
Torque Switch
Engine Start
Pushbutton
Horn
Pushbutton
Glow Plug/Choke
Pushbutton
Lift Enable
Pushbutton
Emergency Stop
Button
Low/High Throttle
Switch
Operation Light
Off/Lift/Drive Key
Switch
Low/High Speed Range
Switch
Drive/Steer
Controller
Raise/Off/Lower
Switch
Drive/Steer Enable
Trigger Switch
Rocker Switch
•
Test Platform Raising/Lowering
WARNING
Be aware of overhead obstructions or
other possible hazards around the aerial
platform when lifting.
1. Press and hold lift
“
”
enable pushbutton,
then select and hold raise/off/lower switch
to “
” raise position and raise the
platform to an approximate height of 1 ft.
(30.5 cm). Release switch to stop.
Result:
Platform should rise.
2. Press and hold lift
“
”
enable pushbutton,
then select and hold raise/off/lower switch
to “
” lower position and lower the
platform fully. Release switch to stop.
Result:
Platform should lower.
•
Test Enable Trigger Switch
1. Ensure outriggers are fully retracted. Refer
for hydraulic outriggers
operation.
2. Ensure path of intended motion is clear.
3. Select off/lift/drive key switch to “
”
drive position.
4. Without activating “
” enable trigger
switch, attempt to drive and steer the
aerial platform.
Result:
Drive and steer functions should
not operate.
•
Test Steering
1. Activate and hold enable trigger switch,
and then press rocker switch on top of
controller to “
” left and “
”
right.
Result:
Steer wheels should turn left and
right.
•
Test Horn
1. Push “
” horn pushbutton.
Result:
Horn should sound.
FAMILIARIZA
TION
FAMILIARIZA
TION
