Skyjack SJ7127 RT Operating Manual Download Page 44 | Manualshive

Page: 44 / 94

background image

Page 44

December 2007

Rough Terrain Scissors

Component Identification

Operation - Section 3

3.5 Component Identification

The following descriptions are for identification,
explanation and locating purposes only.

3.5-1 Manual Storage Box

This weather-resistant box is mounted
inside of the hydraulic/electrical
compartment. It contains operating
manual, ANSI manual of responsibility
and ANSI/CSA certificate. The
operating manual for this make and
model of aerial platform must remain
with the aerial platform and should be
stored in this box.

3.5-2 Maintenance Support

The maintenance support is a safety mechanism
designed to support the scissor assembly. When
properly positioned, it can support the scissor assembly
and empty platform. The maintenance support must
be used when inspection and/or maintenance is to be
performed within the lifting mechanism. To lower the
maintenance support, push lock lever rearward and the
maintenance support will drop. Refer to

for

procedure on how to use and store the maintenance
support.

Figure 3-1. Maintenance Support

WARNING

The maintenance support must be used
when inspection and/or maintenance or
repairs are to be performed within the
lifting mechanism. Failure to use this
safety mechanism could result in death

or serious injury.

WARNING

Do not reach through the scissor assembly
when the platform is raised without the
maintenance support properly positioned.
Failure to avoid this hazard could result

in death or serious injury.

3.5-3 Electrical Control Console

This auxiliary control console is located in the hydraulic/
electrical compartment. It contains the following
controls:

2

1

Figure 3-2. Electrical Control Console

1.

Hourmeter -

This gauge records accumulated

operating time of engine.

2.

Circuit Breakers -

In the event of a power

overload or positive circuit grounding, the circuit
breaker pops out. Push breaker back in to reset

«
...
42
43
44
45
46
...
»

Summary of Contents for SJ7127 RT































































































Reviews:

No comments

Related manuals for SJ7127 RT

Brand: RUDETRANS Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands