SJ 63AJ
December 2007
Page 23
It is the responsibility of the operator to read, completely understand and follow all instructions and warnings
contained in this operating manual and on the aerial platform.
F
AMILIARIZA
TION
• High Pressure Filter
-
Ensure housing is secure and shows no
visible damage or leakage.
• Hydraulic Pumps
-
Ensure there are no loose or missing
parts and there is no visible damage.
-
Ensure all bolts are properly tightened.
-
Ensure all fittings and hoses are properly
tightened and there is no evidence of
hydraulic leakage.
• Muffler and Exhaust
-
Ensure muffler and exhaust system are
properly secured, with no evidence of
damage.
• Engine Pivot Tray
-
Ensure there are no loose or missing
parts and no visible damage to the engine
pivot tray.
• Engine Oil Level
-
Maintaining the engine components
is essential to good performance and
service life of the MEWP.
WARNING
Beware of hot engine components.
Check oil level on dipstick
-
Oil level should be in the “safe” zone.
Add oil as needed. Refer to
Table 4.2b
for
recommended oil type.
• Engine Air Filter
-
Ensure there are no loose or missing
parts and there is no visible damage.
• Fuel Leaks
-
Ensure that there no fuel leaks.
DANGER
Engine fuels are combustible. Inspect
the MEWP in an open, well-ventilated
area away from heaters, sparks and
flames. Always have an approved fire
extinguisher within easy reach.
-
Ensure fuel tank, hoses and fittings show
no visible damage and no evidence of
fuel leakage.
High Pressure
Filter
Battery
Charge
Indicator
Main Power
Disconnect
Switch
Swing Drive
Motor
Muffler
Air Filter
Section 2 - Familiarization
Visual & Maintenance Inspection