Loading/Unloading
Section 3 - Operation
3.10-2 Locking the Turret
1.
Ensure that turret is positioned so that turret
transportation lock (
item 1 - Figure 3-13
) is aligned
into one of four turret locking points.
2.
Pull out turret lock retaining pin (
item 2 - Figure 3-13
).
Lower turret lock into locked position and reinsert
turret lock retaining pin.
3.10-3a Lifting (40T/45T)
1.
Place boom in stowed position (boom lowered and
fully retracted, jib fully down, if equipped) centered
between drive wheels. Lock turret using turret
transportation locking pin (refer to
Section 3.10-2)
into one of two transport/lift points only (refer to
Figure 3-13
).
2.
Turn main power disconnect switch to “
” off
position.
3.
Clear platform of all personnel, tools and materials.
WARNING
When lifting the aerial platform, lifting
devices must be attached to designated
lift points only (refer to
Figure 3-14
).
WARNING
Use chains with load capacity sufficient
to withstand aerial platform weight.
Refer to the serial plate of the aerial
platform for specific weight.
4.
Properly adjust rigging to ensure aerial platform
remains level during lifting. See Center of gravity
location (
Figure 3-14
).
2
1
Transport/Lift Point
Transport Point
Transport Point
Transport/Lift Point
Figure 3-13. 40/45T Turret Transportation Lock & Locking Points
Figure 3-14. 40/45T Lifting Points
61”
X
C
L
X = 8” (0.2 m)
X = 4” (0.1 m)
Page 60
SJ 40T & SJ 45T
SJ 61T & SJ 66T
Summary of Contents for SJ45T
