Skyjack SJ45T Operating Manual Download Page 41

Page: 41 / 106

It is the responsibility of the operator to read, completely understand and follow all instructions and warnings

contained in this operating manual and on the aerial platform.

AMILIARIZA

TION

2.6 Emergency Lowering Procedures

This  section  guides  the  operator  on  how  to  use
emergency  lowering  system.  This  system  allows
platform  lowering  in  the  event  of  an  emergency  or
engine malfunction.

NOTE

The emergency power unit has two-minute

duty cycle.

CAUTION

Do not use emergency power unit
continuously for more than two minutes.

2.6-1

Base Control Console

Ensure engine is off.

Pull out “

” emergency stop button.

Turn key switch to “

” base position.

Select “

” emergency power position from

start/function enable/emergency power (start/
emergency power) switch and activate desired
boom function.

2.6-2

Platform Control Console

Ensure engine is off.

Pull out “

” emergency stop button.

Select “

” on position from engine start/on/off

switch.

Depress and hold footswitch.

Turn “

” emergency power switch to “ ” on

position and activate desired boom function.

SJ 40T & SJ 45T

SJ 61T & SJ 66T

Page 41

Section 2 - Familiarization

Procedures

Summary of Contents for SJ45T











































































































Search results

Summary of Contents for SJ45T

Reviews:

Related manuals for SJ45T

Brands by name

Popular brands

Skyjack SJ45T, Operating Manual

Search results

Summary of Contents for SJ45T

Reviews:

Related manuals for SJ45T

Brands by name

Popular brands