SECTION 2, Page 18
SJ 600, 800 & 1000 Series
122883AH
May 2002
Identification And Operation of
Safety Devices
Fold-Down Guardrail System
Figure 2-11. Fold-Down Guardrail System
Fold-Down Guardrail System
- This system when
folded down, reduces the shut height of the work
platform for transporting and traveling through
doorways.
1. Guardrail Locking Pin W/Lanyard
- To fold the
guardrail system down, remove the locking pin at
each pivot point and lower each guardrail. To raise
the guardrail system, swing up each guardrail and
lock in place with the locking pins ensuring that the
detent ball of each pin is clear of the side of the pivot
brackets
. (Figure 2-12.)
Warning
The guardrail system
MUST
be upright and locked in
place before resuming normal operation.
Check the
guardrail system for loose or missing locking pins
before operating this equipment!
Figure 2-12. Correct Position of Locking Pin
Base Controls - Manual Safety Bar
Figure 2-13. Safety Bar
1. Safety Bar
- Designed to support the scissors
assembly (when properly positioned), the safety bar
MUST
be used for inspection and performing
maintenance or repairs within the scissors assembly.
To lower safety bar, push lock lever rearward and the
safety bar will drop. Follow procedure on safety bar
decal to properly position safety bar.
Warning
Crushing Hazard
DO NOT
reach through scissor assembly without the
safety bar properly positioned.
Failure to avoid this
hazard will result in death or serious injury!
DETENT BALL
CLEAR OF SIDE
OF PIVOT
BRACKET
1
1
1
