SECTION 1, Page 8
SJ 600, 800 & 1000 Series
122883AH
May 2002
Serial Number Nameplate
- The serial number
nameplate, located on the rear of the machine, lists
the model number, serial number, machine weight,
drive height, capacities, platform height, voltage,
system and lift pressures, and date manufactured.
Use this information for proper operation and
maintenance and when ordering service parts.
Optional Accessories
- The SKYJACK Work
Platform is designed to accept a variety of optional
accessories. These are listed in
Table 1-2
. Standard
Features and Optional Equipment. Operating
instructions for these options (if required) are located
in Section 2 of this manual.
Operator Warnings
Warning
DO NOT
exert excessive side forces on platform
while elevated.
DO NOT
overload. The lift relief valve does not
protect against overloading when the
platform is elevated.
DO NOT
alter or disable limit switches or other
safety devices.
DO NOT
exceed the rated capacity of your
scissorlift and make sure the load is
evenly distributed on the platform.
DO NOT
raise your platform in windy or gusty
conditions.
Warning
Jobsite Hazards
DO NOT
operate on surfaces not capable of
holding weight of the work platform
including the rated load, e.g. covers,
drains, and trenches.
DO NOT
elevate the work platform if it is not on
firm level surfaces. Avoid pot holes,
loading docks, debris, drop offs and
surfaces that may affect the stability of
your work platform.
DO NOT
climb or descend a grade steeper than
25% (SJ 1000), 30% (SJ 800) or 35%
(SJ 600) Elevated driving must only be
done on firm level surfaces.
(Ref. Table
1-1)
BE AWARE
of overhead obstacles, and poorly lit
areas in case of overhead obstacles.
ENSURE
that there is no person(s) in the path of
travel.
Warning
Work Platform Conditions
An Operator Should Not Use Any Work Platform That:
•
Has ladders, scaffolding or other devices
mounted on it to increase its size or work height.
•
Does not have a clean, uncluttered work area.
•
Does not appear to be working properly.
•
Has been damaged or appears to have worn or
missing parts.
•
Has alterations or modifications not approved
by the manufacturer.
•
Has safety devices which have been altered or
disabled.
