43
Support Hotline: +49 (0) 2661 98088-112
Support E-Mail: [email protected]
Version No. 1.0
Document No. 97013700
SKS-Kinkel Elektronik GmbH
300113 TK Adapter V2
EN
8.2.14
Reset program
To reset both the program and the master PIN
to default either click on the red arrow symbol or
choose „Password“ and then „Set device back to
default“ in the task bar.
ATTENTION:
If you carry out this function all your configu
-
ration both on the program’s interface and the
TK Adapter V2 will be deleted and the master
PIN is reset to „0000“.
The LED “Betrieb/Power “ will change from perma
-
nently on (powered) to a slow 1 Hz flashing (once
per second)
8.2.15
Software version
To read out the actual software version of the
TK Adapter’s PC software click on
“TK Adapt-
er”
in the task bar and then choose
“Software
version“
. A menu will pop up showing the actual
version.
The most recent version can be downloaded
at any time from the SKS-Kinkel website under
https://www.sks-kinkel.de
.
8.2.16
Log out
After the configuration of the TK Adapter V2 you must log out to end the programming mode and enable the TK-
Adapter V2 to put through door calls again.
To do so click on
“Disconnect”
at the top right of the program interface. The display changes from
“green”
and
“Logged in”
to
“red”
and
“Logged out”
.