39
Support Hotline: +49 (0) 2661 98088-112
Support E-Mail: [email protected]
Version No. 1.0
Document No. 97013700
SKS-Kinkel Elektronik GmbH
300113 TK Adapter V2
EN
8.2.8.2 Time before redirection
The time before redirection is the time span after which the call is put through to the second number of the
attendee or Master when the first number is not answered. Please mind that this time span must always be
shorter than the maximum ringing time (see last chapter).
8.2.8.3 Delay to take call
Here you can set a time span in seconds by which all calls on the telephone system are delayed. This setting is
sensible in case both indoor stations and a telephone system are installed and it should be possible to answer
the call at the indoor station.
8.2.8.4 Read TK Adapter time/Set time to PC time
The TK Adapter V2 is equipped with a real time-clock. The
device’s time used at this very moment is displayed in the
field “Time of day TK Adapter” by clicking on the button
“Read time TK Adapter” and will be updated when read
out again, i.e. it doesn’t keep running on the program’s
interface.
If the TK Adapter’s time is different from the actual time, it
can be updated to your personal computer’s time by click-
ing on the button “Set time to PC time”.
8.2.8.5 Accept call by pushing a key
If this function is enabled by ticking the box, the call can be taken on the phone only by pushing one of the
number buttons. Using this function, the audio connection with the door station is activated by pushing the
button i. e. sound is transmitted to the door station after the button is pushed. Is this function disabled the call
is answered by picking up the receiver and sound is transmitted directly, in this case potential ringing tones will
be heard at the SKS door station.
8.2.8.6 Automatic door opener active
If the automatic door opener is activated, this function is performed when the SKS address calls is saved for
one of the attendees. This function makes sense to enable for example patients of a doctor or the members of
a company to open the door by themselves.
8.2.8.7 Read out/write configuration
After you have done your first configuration on your
personal computer, it must be conveyed to the TK Adapt-
er V2 to activate it. – This is done by clicking the button
“Write configuration”. Has the configuration successfully
been conveyed this is shown in the history window on the
bottom right.
In the same way it is possible to read out the TK Adapter’s
configuration to save it on your personal computer. To do
so, click on “Read configuration” and the configuration of
the TK Adapter is read out and conveyed to the program’s
interface. This is also recorded in the history window.
