37
Support Hotline: +49 (0) 2661 98088-112
Support E-Mail: [email protected]
Version No. 1.0
Document No. 97013700
SKS-Kinkel Elektronik GmbH
300113 TK Adapter V2
EN
✓
Redirect all calls to master
Using this function all incoming calls can be redirected to the Master, i. e. no calls are put through to
the attendees as long as this function is active.
✓
Redirect all calls to master from ___ to ____ o’clock
Here you can set a daily time span during which all incoming calls are redirected to Master, for exam-
ple during night time. I.e. no calls will be put through to the attendees during this time span as long as
the function is enabled.
8.2.6.2 Attendees
The first attendee needn’t be created manually, he is already configured when starting the program.
To describe the attendee a text of up to 24 characters can be entered, this is saved in an XML-file and can be
used only in the program interface, the TK Adapter V2 itself does not save this description.
For every attendee
at least one valid call number (Call number 1)
needs to be set, additionally you can
assign a second call number to each attendee
(= Call number 2)
. All call number can consist of up to 24 digits
and can be chosen freely. Except for numbers, spaces and the following special characters may be used: “-“,
“+“, “#“ and “*“.
Each attendee also needs a
valid SKS BUS address
, ranging between A1 and H24. Here usually the flat
number is encoded using a Capital letter and the floor number using a number between 1 and 24. The SKS
BUS address must be clearly assigned to one attendee only, i. e. each address can only be used once.
To make the set-up easier you can fill in the data needed in the following table.
Teilnehmer
SKS-Rufadresse
1. Rufnummer
2. Rufnummer
Master
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
For every attendee the following functions are available:
✓
Call number 2 before number 1
Using this function the second call number will be dialled straight away.
✓
No call signalling
If activated no calls will be put through to the attendee’s call numbers.