Skov DOL 434 LPV, Technical Manual

Page: 51 / 68

DOL 434 LPV
Technical Manual 51
Use humidity control
: Standard humidity control according to one of the following
principles: Humidity ventilation, Temperature reduction or Humidity heat. The re-
quired principle is selected in the menu
Climate | Humidity | Humidity con-
trol mode
.
Block humidity control : The house controller blocks the humidity control when it is
hot and humid outside.
Increase tempe block humidity control : The house controller blocks the
humidity control when it is hot and humid outside and the temperature setpoint is in-
creased to reduce the humidity. You should only select this setting when the ani-
mals are able to withstand a rise in temperature.
See also the section Humidity in the User Manual.
Ventilation mode
In the case of humidity ventilation.
Setting of control mode: PID or adaptive.
See also the sections Humidity control at PID ventilation mode [ } 51] and Humid-
ity control at adaptive ventilation mode [ } 51] .
Heat mode
At Humidity heat .
Setting of control mode: PID or adaptive.
See also the sections Humidity control at PID heat mode [
}
52] and Humidity con-
trol at adaptive heat mode [
}
52] .
6.5.5.1.1 Humidity control at adaptive ventilation mode
Control mode At humidity control according to the principle Humidity ventilation .
Select Adaptive - self learning for the humidity control to automatically adapt to the
conditions in the house in question.
The adaption time is set in the menu Climate | Humidity | Settings | Adap-
tive reaction for ventilation
.
This feature is only available when a humidity sensor is installed.
See section Adaptive control [
}
44] for a general description of adaptive control.
6.5.5.1.2 Humidity control at PID ventilation mode
Outside temp. 20 °C/68
°F factor Factor for humidity control. Ventilation is changed by the set factor (2.5) for each 1
% relative humidity at an outside temperature of 20 °C.
Outside temp. 0 °C/32
°F factor
Factor for humidity control. Ventilation is changed by the set factor (1.5) for each 1
% relative humidity at an outside temperature of 0 °C.
Integration time (short)
Reaction to too high humidity.
Longer time = slow ventilation build-up.
Shorter time = faster ventilation build-up.