DOL 434 LPV
10
Technical Manual
3.4 View week number
View week number
View of week number at the top of all pages.
3.5 Select type of Unit of measurements
Unit of measurements
The controller can display the units as both metric and US units.
3.6 Connecting Components
The majority of the connection terminals are universal. Different components can therefore be installed using
the individual terminals.
When you select a component from the menu
Technical
| Installation | Manual installation
the house controller allo-
cates I/O on the basis of a list. This means that the house con-
troller selects the first available I/O on the list, and that the com-
ponents are allocated I/O in the order they are selected.
The same I/O allocation in several controllers – i.e. when the in-
dividual components are connected to the same terminal num-
bers – is ensured by saving the set-up on a USB stick and en-
tering the set-up into several controllers.
3.6.1 Installation wizard
The installation wizard starts automatically when you switch the controller on for the first time. The wizard pro-
vides a structured walk-through of the installation of controller functions. We recommend using the wizard for in-
stallation.
Thus it supports that necessary selections and settings are made in connection with the controller setup.
Choose between:
•
Technical | Installation wizard
: A complete installation
walk-through.
•
Technical | Manual installation
: Installation or adaptation of
a specific function, for example, cooling. Here individual
changes can be saved.
Press the arrow buttons in the top right corner to move one step
forwards or backwards in the installation.
Press the X in the upper left corner to terminate the installation
before all steps are completed.
Press
Cancel
to finish without saving.
Press
Confirm
to save changes.
Also see section Work Routine for an overview of the complete
procedure for setting up the house controller.
