31
SKOPE TME650/1000
Replacement Procedures
Service Manual
Hinge
Reversal
The glass door can be hinged on either the left or right hand side (TME650
only).
To reverse the door hinging
1. Disconnect the chiller from the power supply.
2. Remove the door (see “Door Removal” on previous page).
3. Remove the torsion bar assembly from the door (see “Torsion Bar
Replacement” on page 30
4. Refit the torsion bar assembly into the opposite end of the door.
5. Refit the top door bush.
6. Refit the door to the cabinet (see above).
7. Re-tension the door (see “Door Tension” on page 29).
