35
SKOPE TME650/1000
Replacement Procedures
Service Manual
Removing the
Refrigeration
Unit
Follow these steps to remove the refrigeration unit from the cabinet.
To remove the refrigeration unit
To refit the refrigeration unit
1. Disconnect the chiller from the power supply.
2. Unplug and remove the sign
unit or top panel, and remove
the sign back and sides.
3. Unplug the unit from the
cabinet and undo the unit
fixing screw to detatch the unit
from the cabinet.
4. The unit is heavy. Use caution
when removing the unit from
the cabinet, and take care of
the sealing strip on the bottom
of the unit.
Lift the unit out, up and off the
cabinet.
1. Carefully lift the unit, place on
top of the cabinet and slot the
condenser end under the clip.
Ensure the bottom of the unit
is aligned with the port holes
on top of the cabinet.
2. Fix the unit to the top of the
cabinet with the fixing screw
and plug the unit into the
cabinet.
3. Refit the sign sides and back,
plug the sign panel into the
unit (if applicable) and fit the
sign unit or top panel.
Plug
Clip
Fixing Screw
