SKF Telemag TFG 1, Installation, Operation And Maintenance Manual

Page: 7 / 41

7
L531
2,
1
675D
.0/
10.
10
2. Safety
This chapter is intended for all users of the TFG telescopic pillar. It contains infor-
mation on its safe use and optimal utilization.
Safety program
The safety program from SKF Actuation System spells out who is entitled to use it and
the responsibility of individual users.
The TFG was designed and built in accordance with the latest technical standards and
accepted safety rules. The requirements of the stated standards were included and
checked as applicable (see
Standards applied , page 40).
EU-conformity is documented with the technical documentation.
Purpose of the TFG
The telescopic pillar TFG has been designed and built to be operated in accordance with
its intended use. If you use the TFG for any use other than that cited, the manufacturer
cannot be held responsible for damage resulting from this.
The TFG has been specifically designed for the movement of patient tables, instrument
carriers, instrument tables, small lifting tables and dentist's chairs.
Intended use
The intended use of the TFG is:
■
dynamic, compression or tension loaded stroke.
Please note: For the operations data, please see the
Appendix
of this operating
manual (see
Equipment and operating data
, page 33).
Unauthorized use
Any use other than the intended use without the manufacturer's written agreement or
operation beyond the technical limits is considered unauthorized.
You can find the technical operating limits in the appendix ( Technical data , page 33) of
this manual and on the type plate of the TFG.
Please note: Any unauthorized use of the TFG can cause personal injury and prop-
erty damage. Always adhere to the instructions of this manual.