17
L531
2,
1
675D
.0/
10.
10
Normal operation
4.
Normal operation
This chapter is directed at the user groups
operator
and
operating authority
. It pro-
vides all the information required for the safe and smooth operation of the tele-
scopic pillar under normal operating conditions.
Normal operation
In normal operations the telescopic pillar lifts or lowers elements which are connected
to the TFG via the inner and outer tube.
Preconditions for operation
TFG 1..: The TFG is driven by the corresponding SKF control unit and the corresponding
SKF operating element (see
TFG 5.., TFG 9..: The control is driven via the integrated control unit and the correspond-
ing SKF operating element.
Switching on telescopic pillar
WARNING
Warning for risk of crushing and damage to the TFG caused by stat-
ic and dynamic overloading of the telescopic pillar. When driving
against fixed objects the impact of the force can cause personal in-
jury. Make sure that there are no persons or fixed objects present
in the danger zone during the stroke.
•
Note the maximum permissible operating data in the Appen-
dix (see
•
Note the type plate of the telescopic pillar
WARNING
Warning of side-acting forces. Excessive side-acting forces destroy
the pillar and pose a danger to persons. During the stroke, do not
manipulate any of the elements that are connected to the TFG.
•
You can find the maximum permissible values in the appendix
(see
!
!
