16
L531
2,
1
675D
.0/
10.
10
Construction and function
Important: The mains supply must only take place from one side at a time.
Operating elements
feed through
With the operating elements feed through, one SKF operating element can be connected
under the final plate (
❙
Only for TFG 5.., TFG 9..:
This facilitates the option to connect and use operating
elements simultaneously, at the bottom and at the top.
Accessories
Adapter plates
It is the purpose of the adapter plates to ensure that the fastened application is seated
fully and solidly. The application must be fastened to the adapter plate with 4 fastening
screws.
Mains cable
❙
Only for TFG 5.., TFG 9..:
Mains cables and plugs for specific countries can be sup-
plied as accessories.
Control unit
❙
Only for TFG 1..:
The telescopic pillar TFG 1.. requires a SKF control unit to power
the motor. Only use SKF control units.
Operating elements
The telescopic pillar TFG can be operated remotely by a SKF operating element on the
control unit. Only use SKF operating elements.
Further details on accessories can be found in the appendix (see
Important: SKF Actuation System will not accept liability for any damage caused if
the telescopic pillar TFG is not used with a suitable SKF control unit / operating
element.
