Form 40017 Rev 1906
Page 20 of 26
3. When the required sampling period is completed (or the bag is properly in
fl
ated -
see bag operating instructions
), touch Stop bu
tt
on
to stop sampling, which displays a Sample Summary and automatically resets the accumulated data.
Note:
If pump is shut o
ff
or goes to sleep after a sample is completed and is powered on again, the initial display will be the Sample
Summary of the previous sample run.
For bag sampling:
If the Quick-connect Bag Sampling Adapter accessory was used, remove tubing after
sampling by using
fi
ngertips to press center ring on adapter while pulling tubing away from the adapter.
To set up and run a timed sample
1. Set sample duration as follows:
From Main Menu:
Touch Sample
> Touch
Flow
or
Advanced
Hour digit 1 will
fl
ash.
Touch up/down arrow bu
tt
ons to increment/decrement hour.
Touch right arrow to advance to hour digit 2 (will
fl
ash) and up/down arrow bu
tt
ons to adjust
hour digit 2. Repeat through minutes.
Touch check mark to accept new time and return to Clock Menu. New time se
tt
ing will display.
2. Connect pump to sample train.
See To sample, Step 2, on page 18.
3. Run sample as follows:
> Touch Time button in Flow Menu to
set sample duration.
> Touch Time button in Advanced
Menu to set sample duration.
