Siruba BH9820, Operation Manual

Page: 25 / 95

17
3.2 Manual Mode
For the cutter will act during the manual sewing, please keep hand away from the
cutter. Otherwise the operator may suffer serious injury.
Under manual mode, turn the wheel to
move the cloth-feeding board stitch by
stitch. This will simplify the operation in
synchronizing adjustment of yarn-divider.
⑧
Press Manual Mode
Shape of Sewing Stitch Form (1), Pattern
Number (2), Cutter Action (3), Total Stitch
Number (4) and Leftover Stitch Number (5)
are shown in the sewing data display area.
⑨
Press to select the
wanted pattern number (2).
The pattern number (2) will change in
the following sequence: P01
→
P02
→
… P20
→
C1
→
C2…C9 at each pressing of .
（
Press to change the number in
contrary direction.
）
⑩
Lay the fabric for sewing under the presser,
step the presser pedal (6) to lower the
presser.
⑪ Step start pedal (7) to move the
cloth-feeding board to the position
of
sewing start.
Caution: When setting the cutter action
as “Cut-before-Sewing”, the operator shall
look out for his hand at cutter moving.