Siruba BH9820, Operation Manual

Page: 37 / 95

29
No. Functions Description Range Changing
Step
Default
Setting
main shaft 0
U153
Last speed of main
shaft
Set the stop speed
250~45
0
10rpm 350
U156
Stop angle of
main shaft
The stop control section will be
prolonged when this value
goes up.
2.5~17.
5
0.5° 11.0
U256
Interval of origin
detect
0: OFF
Do not detect origin
after sewing
1~9: Detect the origin
position after sewing in
0~9 1 0
U301
Parameter column
in Auto Mode
1: Sewing length
2: Interval
1~2 1 1
U350
Forbid Program
Mode
0: OFF
General Conditions
1: ON
Forbid to enter program
mode, the hotkeys are
0~1 1 0
U351
Forbid Cycle Mode
0: OFF
General Conditions
1: ON
Forbid to enter cycle mode
0~1 1 0
U352
Forbid to
change counter
0: OFF
General Conditions
1: ON
Forbid to change the value
in products counter
0~1 1 0
U353
Forbid to edit
sewing
speed
0: OFF
General Conditions
1: ON
Forbid to change the
sewing speed
0~1 1 0
U354
Forbid to edit
the program
number
0: OFF
General Conditions
1: ON
Forbid to change the
program number, but the
step number in cycle can be
0~1 1 0
U355
Forbid to change
Cut-before-Sewing
0: OFF
General Conditions
1: ON
Forbid to change the action
of Cut-before-Sewing (If
existing status is Cut-before-
Sewing, it will change to
Non-cut automatically.)
0~1 1 0
U356
Forbid to change
Cut-after-Sewing
0: OFF
General Conditions
1: ON
Forbid to change the action
of Cut-after-Sewing (if
existing status is Cut-after-
Sewing, it will change to
Non-cut automatically)
0~1 1 0
U357 Safety Switch 0: OFF Safe Switch Invalid 0~1 1 1