Siruba BH9820, Operation Manual

Page: 15 / 95

7
No. Figure Functions Remarks
12
Cloth-tightening Permitted/
Forbidden
The indicator light will be on if
permitted, and off if forbidden.
13 Front/Back
Shift the cloth-feeding positions
from
“Front” to “Back”. The indicator light
will be on if set as “Front”, while off if
14 Cut-before-Sewing
Set as cut-before-sewing, the
indicator
light will be on; while set
as cut-after-sewing or no cut, the
15 Cut-after-Sewing
Set as cut-after-sewing, the indicator
light will be on; while set
as cut-before-sewing or no cut, the
indicator light will be off.
2.3.2 Setting of Pattern Program
It is advised to preset the parameters
of pattern data frequently used so
that user would only need to select the
pattern number to enter the set
pattern in the future usage, which
saves the time for resetting the
parameters at each time.
20 patterns can be registered at
most, and their parameters can be
altered at any time.
When leaving the factory, pattern
numbers from P01~P20 save the
default pattern program (Patterns from
P01~P20 are all the same.)
⑧
Press
⑨
Select a pattern number from
P01~P20 (1) for changing the
content.
Pattern number (1) will change in
the following sequence: P01
→
P02
→
… P20
→
C1
→
C2…C9, at each
pressing of (press to
change the number in the contrary
order).