Siruba BH9820, Operation Manual

Page: 36 / 95

28
No. Functions Description Range Changing
Step
Default
Setting
the pedal 1 is stepped
U056
Lower presser
when move front
0: OFF
After sewing, the cloth-
feeding board moves to the
position set before with the
presser at up position; the
presser keeps up during
searching origin.
1: ON
After sewing, the
presser doesn’t rise
until the
cloth-feeding board moves
to the position for laying
cloth;
during the process of
searching
origin, the presser keeps
0~1 1 0
U057
Enable presser
at test
0: OFF
The raise of presser
is forbidden in test
mode
1: ON
In Test mode, the following
operations can make presser
go up:
(A): Manual switch type or
double pedal type:
press presser switch
(B): pedal type
：
return to
pedal
In restarting the test mode,
the following operations have
to be done for lowering the
presser (A): Manual switch
type or double pedal type:
0~1 1 0
U058
Presser action
after sewing
0: Up
Presser goes up when the
automatic sewing is
finished
1: Down
Presser keeps going down
when the automatic sewing
is finished. Please perform
the following operations
when the presser rise:
(A): Manual switch type or
double pedal type: press
presser switch
0~1 1 0
U150
Stop at needle
upper position
when suspended
OFF: At pause, the upper axis
is in the status of
emergency stop
ON: At pause, the upper
axis stop at needle upper
0~1 1 1
U152
Final stch spd of Set speed of the last stitch
700~90 10rpm 800