Siruba BH9820, Operation Manual

Page: 28 / 95

20
3.3.2 Method for Releasing Pause
(Stopping the Work)
④
Press RESET (2) when the interface
displays “Pause Switch is
pressed
under machine sewing
status”.
Then the operation penal will return to
the sewing interface, and the
pattern data display area shows
“Press ‘Reset’ or ‘Down’”
⑤
Release the error causing the pause.
⑥
Press . After the needle rod
and the cloth-feeding board
performs the
origin test, they will return to the
position for setting cloth.
3.3.3 Method for Releasing Pause
(Continuing the Work)
⑩
Press RESET (2) when the interface
displays “Pause Switch is pressed
under
machine sewing
status”.
Then the operation penal will return
to the sewing interface, and the
pattern data display area shows
“Press ‘Reset’
or ‘Down’
⑪ Release the error causing the pause.
If the upper thread is broken,
press
to enter the threading mode.
⑫ Press to display the total
stitch number of pattern (3) and the
leftover
stitch number (4) in the pattern data
display area.
⑬ Press or to move
the cloth-feeding board according
to the
shape of pattern so as to confirm the
position for continuing the sewing job.
If the upper thread is broken,
press
to enter the threading mode.
Note: press to proceed
and to reverse. Holding means to
keep proceeding or reversing.
⑭ Select the position for continuing the
sewing, step the start pedal (5)
to
continue the automatic sewing of the
existing pattern.