Siruba BH9820, Operation Manual

Page: 41 / 95

33
No. Functions Description Range Changing
Step
Default
Setting
U913
DIP1
Temporary adjusting
parameter
-100~1
00
1 0
U913
DIP2
Temporary adjusting
parameter
-100~1
00
1 0
4.5 Initialization of Parameters
In the setting mode, press or to
select “parameter initialization” and press to
enter the interface of U level parameter setting.
Press to quit the parameter setting interface.
After entering the parameter setting mode,
user can select:
(1) LEVEL1: Pattern And C Program (S Level
pattern parameter and C pattern cycle
program) (2) LEVEL2: Storage Data
(Including U level
parameters)
(3) LEVEL3: All Internal Data
The detailed initialization content is at below:
Level & Content of Initialization
LEVEL1 LEVEL2 LEVEL3
Program
content
Default
value
— Default
value
Cycle program Clear — Clear
Storage switch — Default
value
Default
value
Program
number
1 — 1
Parameter
number
1 — 1
Production
counter
— — 0
Mode Program — Program
Position for
laying cloth
Inside — Inside
Cutter action OFF — OFF
②
Select the parameter for initialization, then press
for confirmation.
The right interface will be displayed on the
screen, press to initialize the parameter
or press to cancel the initialization operation.