Sirona inEos Blue, Operating Instructions Manual, Page: 42 / 52

63 33 632 D3446
42 D3446
.
201.02.03
.
23 07.2011
11 Performing 3D acquisition Sirona Dental Systems GmbH
11.6 Examples Operating Instructions Sirona Dental CAD/CAM System
7. To stop acquisition, single-click the Start button of the inEos Blue.
Acquiring detail scans
1. Set the angle of the model holder so that the areas required for the
design can be completely acquired.
Tip: You can rotate the model in the
"3D Preview" window. In this
way, you can determine whether the information is complete.
2. Click the Start button of the inEos Blue twice to create single scans.
ª
The overview image is supplemented.
3. Repeat steps 1 and 2 until all required areas have been covered.
Tip: If you have selected
"Buccal scan" as the bite registration
system, make sure that buccal parts are included in the scan as well.
11.6.1.2 Rotational scans
Rotational scans
Perform the following steps for both abutment teeth.