Sirona inEos Blue, Operating Instructions Manual, Page: 21 / 52

63 33 632 D3446
D3446
.
201.02.03
.
23 07.2011 21
Sirona Dental Systems GmbH 6 Initial installation of the software
Operating Instructions Sirona Dental CAD/CAM System
6.5 Adding inEos Blue to the device configuration
Adding inEos Blue to the device configuration Calibrating the system
1. Click "Settings"/"Configuration"/"Devices..." in the user software.
ª
The
"Configure Devices" dialog box opens.
2. Click the
"Add automatically" button and enter a name for this device
(
"inEos Blue" is suggested).
3. Click the "Add Device" button.
ª
The installation is now completed.
Calibrating the system
NOTICE
inEos Blue is not displayed
If inEos Blue does not appear in the
"Configure Devices" dialog, check
the configuration of the interface (see the section entitled “Checking and
configuring the serial interface“).
NOTICE
Calibrating the system
After installing the inEos Blue, you must calibrate the system (see the
chapter entitled "Calibration" [ → 27]).