Sirona inEos Blue, Operating Instructions Manual, Page: 34 / 52

63 33 632 D3446
34 D3446
.
201.02.03
.
23 07.2011
11 Performing 3D acquisition Sirona Dental Systems GmbH
11.2 Raster scans Operating Instructions Sirona Dental CAD/CAM System
11.1.5 Operating the foot switch
Operating the foot switch
You can use the foot switch instead of the start button of the inEos Blue.
Link to inEos Blue
To do this, connect the foot switch as described in the chapter entitled
"Connecting the foot switch" [ → 23].
11.2
Raster scans
Raster scans
11.2.1 Preparing the model
Preparing the model
1. Secure the model to the model holder included. The labial side faces
the fixing screw.
2. Release the ball and socket joint.
3. Align the model:
The model is horizontal and the front teeth stand parallel to a triangle
side.
4. Remove the sliding block from the model holder.
11.2.2 Taking a scan
Taking a scan
Tip: Do not change the position of the ball-and-socket joint during
acquisition.
NOTICE
Do not damage the shifting plate
Do not apply any pressure to the model when it is located on the shifting
plate. Doing so could damage the shifting plate.